You are here:
10G Dual Port Multi Mode
10G Dual Port Multi Mode
Product description
The SR/SW Dual port fiber single bypass modules is design expressly for Intrusion Prevention System (IPS) provides complete visibility to network traffic, It also introduces a point of failure should the IPS lose power, cable fail or application freeze. The module design for PCI Express X8 interface, which means it can support 10.3Gbit/s in full duplex mode per port of data transfer rate and OM-3 Multi-mode fiber operations. SR/SW Quad port fiber bypass modules designed to be compliant digital diagnostic monitoring function: Temperature, VCC , TX optical power, TX laser bias current, and RX received optical power, The post-amplifier of the SR/SW Dual port fiber single bypass modules also includes a Loss of Signal (LOS) circuit that provides a TTL logic-high output when the received optical level is below a preset LOS Assert threshold.
Key features
．Compliant with IEEE 802.3ae 10GBASE-SR
．Compliant with IEEE 802.3ae 10GBASE-SW
．Link Distances at 10.3Gbps 300m links with 50/125um OM-3 MMF Cable
．EEPROM with Series ID Function
．Quad LC Connector interface with optical Bypass Function
．Laser Class 1 Product with comply with Requirements of IEC 60825-1 and IEC 60825-2
．LED indicate operation function
Application areas
．In-Line tracffic Monitoring, Analyzing and Optimization
．Intrusion Prevention System
．Quality of Service
．In-Line Sercurity
．Load balance
．Web Acceleration Apliances
Product characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Transmitter | ||||||
| Output Optical Power | POUT | -7.1 | -1.0 | dBm | 50/125um | |
| Optical Modulation Amplitude | OMA | -4.3 | dBm | |||
| Center Wavelength | λC | 840 | 850 | 860 | nm | |
| Spectral Width (RMS) | Δλ | 0.45 | nm | |||
| Transmitter and Dispersion Penalty | TDP | 3.9 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB | |||
| Output Eye | Compliant with IEEE802.3ae | |||||
| Max. Pout TX-DISABLE Asserted | POFF | -35 | dB | |||
| Receiver | ||||||
| Optical Input Power (Over Load) | PIN1 | -1.0 | dBm | 1, 50/125um | ||
| Receiver Sensitivity (AVG.)
(BER<10E-12 and PRBS=231-1) |
PIN2 | -9.9 | dBm | 1, 50/125um | ||
| Receiver Sensitivity (OMA)
(BER<10E-12 and PRBS=231-1) |
PIN3 | -11.1 | dBm | 1, 0/125um | ||
| Stressed Receiver Sensitivity (OMA)
(BER<10E-12 and PRBS=231-1) |
PIN4 | -7.5 | dBm | 1, 50/125um
ISI=3.5dB |
||
| Center Wavelength | λC | 840 | 850 | 860 | nm | |
| Optical Return Loss | ORL | 12 | dB | |||
| LOS Asserted (AVG.) | PA | -30 | dBm | |||
| LOS Deasserted (AVG.) | PD | -30 | -14 | dBm | ||
| LOS Hysteresis | PA-PD | 0.5 | 3.0 | dB | ||
| Optical Bypass Switch | ||||||
| Center Wavelength | λC | 670 | 850 | 980 | nm | |
| Insertion Loss | IRL | 2.5 | 3.0 | dB | 1, 0/125um | |
| Return Loss | ORL | 30 | dB | 1, 0/125um | ||
1.Normal Mode (Bypass Mode Off).
