You are here:
Single-ended MMF 1×2 Optical Switch
Single-ended MMF 1×2 Optical Switch
Product description
Lightwave Link Inc. Single-ended MMF 1×2 optical switch is designed for use in optical fiber communication networks and measurement instruments. The switch consists of two ports that selectively transmits, redirects, or blocks optical power in a fiber optic transmission line. The optical switch must be actuated to select or change between two states. Furthermore, for the Latching type, it only takes an electrical pulse width with duration ≧20msec to change the state. As a result, it consumes low electric energy to operate the optical switch. Lightwave Link Inc. Single-ended MMF 1×2 optical switch fully complies with RoHS Directive 2011/65/EU.
Key features
．Smallest Size
．Low Insertion-Loss
．Fast Switching Speed
．PCB Mountable
．Available in Single Mode
．RoHS Compliance
Application areas
．Optical network protection and restoration
．Optical network monitoring
．Reconfigurable add/drop multiplexers
．Transmission equipment protection
．Research and development
．Wavelength router
Product characteristics
| Parameters | Unit | MMF 1×2 |
| Operating Wavelength Range | nm | 850/1300 |
| Insertion Loss1, 2 | dB | 1.5 |
| Return Loss | dB | ≥ 35 |
| Crosstalk | dB | ≥ 35 |
| PDL | dB | ≤ 0.05 |
| Repeatability | dB | ≤ ±0.02 |
| Operating Voltage | V | 3 or 5 |
| Durability | Cycles | 10 Million |
| Switching Time | ms | ≤ 8 |
| Optical Power | mW | ≤ 500 |
| Operating Temperature | ℃ | -5 ~ +70 |
| Storage Temperature | ℃ | -40 ~ +85 |
| Relative Humidity | % | 5 ~ 95 |
| Dimension | mm | (L)23×(W)11×(H)8.2 ±0.1 |
| Note:
1. Within room temperature and SOP. 2. Excluding Connectors. |
||
