You are here:

10G Quad Port Single Mode

10G Quad Port Single Mode


The LR/LW Quad port fiber bypass modules is design expressly for Intrusion Prevention System (IPS) provides complete visibility to network traffic, It also introduces a point of failure should the IPS lose power, cable fail or application freeze.

The module design for PCI Express X8 interface, which means it can support 10.3Gbit/s in full duplex mode per port of data transfer rate and Single-mode fiber operations. LR/LW Quad port fiber bypass modules designed to be compliant digital diagnostic monitoring function: Temperature, VCC , TX optical power, TX laser bias current, and RX received optical power. The post-amplifier of the LR/LW Quad port fiber bypass modules also includes a Loss of Signal (LOS) circuit that provides a TTL logic-high output when the received optical level is below a preset LOS Assert threshold.


.Compliant with 10GBASE-LR
.Compliant with 10GBASE-LW
.Link Distances at 10.3Gbps 20Km links with 9/125um Single Mode Fiber Cable
.EEPROM with Series ID Function
.Quad LC Connector interface with optical Bypass Function
.Laser Class 1 Product with comply with Requirements of IEC 60825-1 and IEC 60825-2
.LED indicate operation function


.In-Line tracffic Monitoring, Analyzing and Optimization
.Intrusion Prevention System
.Quality of Service
.In-Line Sercurity
.Load balance
.Web Acceleration Appliances


Parameter Symbol Min. Typ. Max. Unit Note


Output Optical Power (AVG.) POUT   -8    0.5 dBm 1 (9/125um)
Optical Modulation Amplitude OMA   -5.2 dBm
Center Wavelength λC   1270   1310   1355 nm
Spectral Width (RMS) Δλ    1.0 nm -20dB width
Side Mode Suppression Ratio SMSR    30 dB
Extinction Ratio ER    3.5 1 (9/125um)
Transmitter and Dispersion Penalty TDP    3.9 dB
Relative Intensity Noise RIN   -128 dB/Hz
Output Eye                        Compliant with IEEE802.3ae
Max. Pout TX-DISABLE Asserted POFF    -35 dBm


Optical Input Power (Over Load) PMAX 0.5 dBm 2 (9/125um)
Receiver Sensitivity (AVG.)

(BER<10E-12 and PRBS=231-1)

PIN1 -14.4 dBm 2 (9/125um)
Receiver Sensitivity (OMA)

(BER<10E-12 and PRBS=231-1)

PIN2 -12.6 dBm 2 (9/125um))
Stressed Receiver Sensitivity (OMA)

(BER<10E-12 and PRBS=231-1)

PIN3 -10.3 dBm 2 (9/125um)


Center Wavelength λC 1260 1560 nm
Optical Return Loss ORL -12 dB
LOS Asserted (AVG.) PA  -16 dBm
LOS Deasserted (AVG.) PD -28 dBm
LOS Hysteresis PA-PD 0.5 3.0 dB

Optical Bypass Switch

Center Wavelength λC 1260 1560 nm
Insertion Loss IRL 2.0 4.0 dB 3 (9/125um)
Return Loss ORL -50 dB 2 (9/125um)


1. Output power is power couples into a 9/125um single-mode fiber.
2. Normal Mode (Bypass Mode Off).
3. Bypass Mode (Normal Mode Off).
4. Pre IEEE802.3ae. Equivalent to -13.3dBm average power at Infinite ER.