You are here:

10G Dual Port Single Mode

10G Dual Port Single Mode

產品描述

The LR/LW Dual port fiber single bypass modules is design expressly for Intrusion Prevention System (IPS) provides complete visibility to network traffic, It also introduces a point of failure should the IPS lose power, cable fail or application freeze. The module design for PCI Express X8 interface, which means it can support 10.3Gbit/s in full duplex mode per port of data transfer rate and Single-mode fiber operations. LR/LW Quad port fiber bypass modules designed to be compliant digital diagnostic monitoring function: Temperature, VCC, TX optical power, TX laser bias current, and RX received optical
power. The post-amplifier of the LR/LW Dual port fiber single bypass module also includes a Loss of Signal (LOS) circuit that provides a TTL logic-high output when the received optical level is below a preset LOS Assert threshold.

主要功能

.Compliant with IEEE 802.3ae 10GBASE-SR
.Compliant with IEEE 802.3ae 10GBASE-SW
.Link Distances at 10.3Gbps 300m links with 50/125um OM-3 MMF Cable
.EEPROM with Series ID Function
.Quad LC Connector interface with optical Bypass Function
.Laser Class 1 Product with comply with Requirements of IEC 60825-1 and IEC 60825-2
.LED indicate operation function

應用領域

.In-Line tracffic Monitoring, Analyzing and Optimization
.Intrusion Prevention System
.Quality of Service
.In-Line Sercurity
.Load balance
.Web Acceleration Apliances

產品特性

Parameter Symbol Min. Typ. Max. Unit Note

Transmitter

Output Optical Power (AVG.) POUT -8 0.5 dBm 1 (9/125um)
Optical Modulation Amplitude OMA -5.2 dBm
Center Wavelength λC 1270 1310 1355 nm
Spectral Width (RMS) Δλ 1.0 nm -20dB width
Side Mode Suppression Ratio SMSR 30 dB
Extinction Ratio ER 3.5 1 (9/125um)
Transmitter and Dispersion Penalty TDP 3.9 dB
Relative Intensity Noise RIN -128 dB/Hz
Output Eye Compliant with IEEE802.3ae
Max. Pout TX-DISABLE Asserted      POFF -35 dB

Receiver

Optical Input Power (Over Load) PMAX    0.5 dBm 2 (9/125um)
Receiver Sensitivity (AVG.)

(BER<10E-12 and PRBS=231-1)

PIN1   -14.4 dBm 2 (9/125um)
Receiver Sensitivity (OMA)

(BER<10E-12 and PRBS=231-1)

PIN2   -12.6 dBm 2 (9/125um))
Stressed Receiver Sensitivity (OMA)

(BER<10E-12 and PRBS=231-1)

PIN3   -10.3 dBm 2 (9/125um)
Center Wavelength λC 1260 1560 nm
Optical Return Loss ORL -12 dB
Parameter Symbol Min. Typ. Max. Unit Note
LOS Assert (AVG.) PA -16 dBm
LOS De-Assert (AVG.) PD -28 dBm
LOS Hysteresis PA-PD 0.5 3.0  dB

Optical Bypass Switch

Center Wavelength λC 1260 1560 nm
Insertion Loss (Bypass Mode) IRL 2.0 4.0 dB 3 (9/125um)
Return Loss (Bypass Mode) ORL -50 dB 2 (9/125um)
Center Wavelength λC 1260 1560 nm

 

1. Output power is power couples into a 9/125um single-mode fiber.
2. Normal Mode (Bypass Mode Off).
3. Bypass Mode (Normal Mode Off).
4. Pre IEE802.3ae. Equivalent to -13.3dBm average power at Infinite ER