You are here:
1G Quad Port Single Mode
1G Quad Port Single Mode
產品描述
The LX/LH Quad port fiber dual bypass modules is design expressly for Intrusion Prevention System (IPS) provides complete visibility to network traffic, It also introduces a point of failure should the IPS lose power, cable fail or application freeze. The module design for PCI Express X8 interface, which means it can support 1.25Gbit/s in full duplex mode per port of data transfer rate and Single-mode fiber operations. LX/LH Quad port fiber dual bypass modules designed to be compliant digital diagnostic monitoring function: Temperature, VCC, TX optical power, TX laser bias current, and RX received optical power. The post-amplifier of the LX/LH Quad port fiber dual bypass module also includes a Loss of Signal (LOS) circuit that provides a TTL logic-high output when the received optical level is below a preset LOS Assert threshold.
主要功能
．Compliant with 10GBASE-LR
．Compliant with 10GBASE-LW
．Link Distances at 1.25Gbps 10Km links with 9/125um Single Mode Fiber Cable
．EEPROM with Series ID Function
．Quad LC Connector interface with optical Bypass Function
．Laser Class 1 Product with comply with Requirements of IEC 60825-1 and IEC 60825-2
．LED indicate operation function
應用領域
．In-Line tracffic Monitoring, Analyzing and Optimization
．Intrusion Prevention System
．Quality of Service
．In-Line Sercurity
．Load balance
．Web Acceleration Appliances
產品特性
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Transmitter | ||||||
| Output Optical Power (AVG.) | POUT | -6 | -1 | dBm | 1 (9/125um) | |
| Extinction Ratio | ER | 9 | 1 (9/125um) | |||
| Center Wavelength | λC | 1280 | 1310 | 1355 | nm | |
| Spectral Width | Δλ | 2.5 | nm | RMS(σ) | ||
| Optical Rise Time (20% to 80% values) | tr | 260 | ps | |||
| Optical Fall Time (20% to 80% values) | tf | 260 | ps | |||
| Total Jitter | TJ | 227 | ps | |||
| Relative Intensity Noise | RIN | -120 | dB/Hz | |||
| Output Eye | Compliant with IEEE802.3z | |||||
| Max. Pout TX-DISABLE Asserted | POFF | -45 | dB | |||
| Receiver | ||||||
| Optical Input Power (Over Load) | PMAX | -3 | dBm | 2 (9/125um) | ||
| Receiver Sensitivity (AVG.)
(BER<10E-12 and PRBS=27-1) |
PIN1 | -26 | -21 | dBm | 2 (9/125um) | |
| Center Wavelength | λC | 1260 | 1610 | nm | ||
| Optical Return Loss | ORL | -12 | dB | |||
| LOS Asserted (AVG.) | PA | -22 | dBm | |||
| LOS De-asserted (AVG.) | PD | -35 | dBm | |||
| LOS Hysteresis | PA-PD | 0.5 | 3.0 | dB | ||
| Optical Bypass Switch | ||||||
| Center Wavelength | λC | 1260 | 1560 | nm | ||
| Insertion Loss (Bypass Mode) | IRL | 2.0 | 4.0 | dB | 3 (9/125um) | |
| Return Loss (Bypass Mode) | ORL | -50 | dB | 2 (9/125um) | ||
1. Output power is power couples into a 9/125um single-mode fiber.
2. Normal Mode (Bypass Mode Off).
3. Bypass Mode (Normal Mode Off).
